Melting & Casting
|

|
This process is designed to cast the slab with D.C
casting method by removing impurities and performing degassing and solidifying
treatments after putting ingot into the melting furnace. The production of
multiple items in small q'ty is available due to use of variable mold. This
Process is equipped with many kinds of the state of the art equipments enough to
produce top quality aluminum alloys.
Main
Equipments Melting Furnace : 23ton * 2units Holding Furnace : 20ton *
1unit Continuous Melting Device Caster : 20ton/CH
|
|
Hot
Mill
|

|
This process is intended to produce hot rolled coil
with a thickness suitable for cold rolling process by applying hot rolling after
scalping and soaking the cast slab. High quality hot rolled coil is available by
the latest rolling mill that can also carry out quality
analysis.
Main
Equipments Slab Scalper : 1unit Hot Rolling
Mill : 1unit Slab Homogenzing : 40ton * 4units
|
|
Cold
Mill
|

|
This process is designed to control such requirements
that products should meet as strength, thckness, elongation and other mechanical
properies by performing cold rolling. Mostly the products with 0.3T~4.8T are
available.
Main Equipments Cold
Rolling Mill : 2units Roll Grinder Available Dimensions -
Thickness : 0.5 ~ 4.6mm - Width : 500 ~ 750mm - Outside Diameter :
Max. 1,300mm
|
|
Finishing
|

|
This is final process producing kinds of circle, coil,
sheets through shearing, slitting and annealing the cold rolled coil. We possess
automatic blanking press, slitting machine combined with washer and micro-flat
functioned mini shearing machine which can supply various kinds & small q'ty
quality sheet with early delivery.
Main
Equipments Automatic Continuous Blanking Press :
5units Annealing Furnace : 15ton *
3units, 4ton * 1unit
|
|
Slitter Line
|

|
Process
|
|
Slitter
Line
|
|
Coil
Weight
|
|
3
ton
|
|
Thcikness
|
|
0.3 - 4.7
mm
|
|
Tolerance
|
|
+ - 0.05
mm
|
|
Output
|
|
1,000
ton
|
|
|
Shear Line
|

|
Process
|
|
Shear Line
|
|
Coil Weight
|
|
3 ton
|
|
Thickness
|
|
0.3 - 4.7
mm
|
|
Tolerance
|
|
+ - 0.1 mm
|
|
Output
|
|
600
ton
|
|
|
PROCESS OVERVIEW
|

|